Roofing is an expensive part of the construction. The roof is also responsible for the protection of the whole building and everything that is in it. Having a strong and right roof is the first step of securing everything in your home. Therefore, avoid all mistakes that can damage your roof. Ensure the roof it’s fixed, maintained and repaired in a way that it’s going to last for the longest time. The following are the common mistakes that roofers repeatedly do when fixing, maintaining or repairing the roof. Avoid all these mistakes if you can.

If your in Perth WA and you need a new roof check out Fremantle Roofing Services for top quality roof restorations. The professional team can supply, paint, repair and install your your roofing requirements

Covering Old Shingles Instead of Replacing Them

This is the most common mistake done in roofing. This is mostly done by the roofing company as a shortcut to your roof repair. It lowers the overall quality of your roofing. The proper manner to repair a portion of your roof is to remove every old shingle and replace with new ones. This is most important where there are some of the shingles which are damaged. Placing new shingle on old ones creates a room for dirt collection and moisture on your roof. This would lead to more damage in future which requires higher cost. When compared to doing the process rightly placing new shingles on the old one is expensive in the long run. Check with your roofing contractors. Instruct them to remove all old shingles. Also, ensure you inspect the work before paying for the contract.

Using Incorrect Fastener Length

Sometimes the roofing contractors use the available fasteners for your roofing. This is wrong. When the nails used on fastening are short, you run a risk of shingles loosening. they can easily be blown away by the wind. The shingles can also start shifting. A premature replacement of the roof will be required after a shorter time. Therefore, when roofing ensures the right rails are used at the right time. 

Reusing Old Flashing 

Metal flashing is normally on your rooftop. Their purpose is to stop moisture and rainfall water from entering your house at the vulnerable parts of the roof. These are especially at the chimneys, roof valleys, and the skylights. When replacing your roof or installing a new roof use new flashing. Sometimes the old flashing is used to cut the cost of roofing but this should not be the case.

Mismatching Slate Coloring

If you choose to use slate roofing ensure they all match. Mismatching of the slate color is a common mistake repeatedly done by the roofers. Before fastening the slates inspect all of them and ensure that they all match. The consistency of the slate coloring is important. Matched slates give your roof a good look compared to mismatched slates.

Mistakes are expensive to correct. When roofing ensures that mistakes that can be avoided are avoided. Explain to your roofers what you need. Ask them to tell you all that they need in the roofing. Shortcuts should be avoided. When mistakes happen in roofing they reduce the performance of the roof. You will be required to correct the mistakes at a very high cost.

Leave a Reply

Your email address will not be published. Required fields are marked *